135,99 zł
Car meter, GL-mini paint tester:
- very small housing
- steel and aluminum car sheets
- measuring range from 0um to 1050um (Fe and Al)
- measurement resolution: 10um
- glowing numbers
- powered by two R3 (AAA) alkaline batteries
- movable measuring head, suspended elastically
- 24 months warranty!
EAN-13 code: 5904730635158
Out of stock
Add to compareSmall and effective – simple to use
Thanks to the production on a modern production line, we were able to create a very small electronic varnish thickness gauge with LED display. The seven-segment, four-digit LED display allows you to measure in all conditions. The numbers glow red by themselves.
Spring measuring head
The meter has a measuring head suspended elastically, which during measurement slightly presses and tilts sideways. This makes measurement much easier.
Calibration function
- simple calibration,
- circuit board included.
The calibration – zeroing function means that the meter will measure correctly in all conditions, even after several years of use.
Before measurements, you can calibrate the meter and be sure that the measurements will be correct.
The meter has compensation thanks to which it automatically calibrates, but accurate calibration is always possible using a calibration plate.
Note the meters without calibration plates – in such meters the measurement error will soon increase, because the probe wears (rubs off) and will additionally affect the aging of electronic components. That is why even meters worth several thousand zlotys have calibration plates and a calibration function in the set.
The set consists of:
- GL-mini paint thickness gauge
- zeroing plate – calibration
- 2 x AAA alkaline batteries
- instruction
| Seria | standard |
|---|---|
| GL-SMART application | ✘ |
| Sheet type | Steel, galvanized steel, aluminum |
| Type of measuring probe | built-in probe |
| Flexible probe | ✔ |
| Ball ended probe | ✘ |
| Measuring range [μm] | 0-1050 |
| Measurement resolution [μm] | 10µm |
| Memory of measurements | No |
| Measurement rel. to a reference point | ✘ |
| HOLD function | Measurement is stopped on the display |
| MEASUREMENT ASSISTANT® function | ✘ |
| Measurement statistics | ✘ |
| UV tester | ✘ |
| Sound indication | ✘ |
| Power supply | 2 x AAA alkaline battery |
| Calibration, zeroing | ✔ |
| Battery discharge indicator | Information about low batteries |
| Illumination of the display | LED illuminating digits |
| Automatically turn off | ✔ |
| Languages | not applicable |
| Case | ✘ |
| Calibration kit | ✔ |
Related products
-
GL-3s-UV varnish meter
194,99 zł -
Lacquer meter GL-6 +
193,49 zł -
GL-MAG varnish meter
45,00 zł
