GL-1 + varnish meter
111,99 zł
Car meter, GL-1 paint tester:
✔ type of measuring probe: built-in probe;
✔ measurement on steel sheets, galvanized steel sheets;
✔ measurement resolution: 10µm or 1µm – selection in MENU;
✔ measurement range (varnish thickness): 0µm to 1100µm;
✔ MEASUREMENT ASSISTANT® function;
✔ meter calibration – zeroing (calibration) plate is included;
✔ LCD backlight;
✔ automatically turn off the meter after prolonged inactivity;
✔ power supply: 9V alkaline battery;
✔ polycarbonate keyboard;
✔ Polish;
✔ 24 months warranty.
EAN-13 code: 5904730635165
Simple and quick measurement with the Measure Assistant® function
Basic gauges for measuring paint thickness on automotive steel sheets. They have the MEASUREMENT ASSISTANT® function with a LED diode and a housing with modern, streamlined shapes.
MEASURING ASSISTANT® function
Funkcja podpowiada oceniającemu samochód czy miał on naprawy blacharsko-lakiernicze.
Podczas dokonywania pomiarów miernik sygnalizuje za pomocą diody LED :
- LED is off – the varnish is correct
- LED is flashing – the second layer of varnish
- LED is on – putty
It should be noted that the MEASUREMENT ASSISTANT® function is only to help in the interpretation of measurements, it cannot be the basis for an unambiguous answer to the question whether the car has had bodywork and paint repairs. Nevertheless, many people who evaluate cars do not really know what a given thickness of paint means, so the above function is to help in this.
LED is on. It means probably putty is there or laquier is not original.
LED is off – the varnish is correct
Calibration function
- simple calibration,
- circuit board included.
The calibration – zeroing function means that the meter will measure correctly in all conditions, even after several years of use.
Before measurements, you can calibrate the meter and be sure that the measurements will be correct.
The meter has compensation thanks to which it automatically calibrates, but accurate calibration is always possible using a calibration plate.
Note the meters without calibration plates – in such meters, the measurement error will soon increase, because the probe wears (rubs off) and will additionally affect the aging of electronic components. That is why even meters worth several thousand zlotys have calibration plates and a calibration function in the set.
The set consists of:
- paint thickness gauge GL-1 +,
- zeroing plate – calibration,
- 9V alkaline battery,
- instruction.
| Seria | super plus |
|---|---|
| GL-SMART application | ✘ |
| Sheet type | Steel, galvanized steel |
| Type of measuring probe | built-in probe |
| Flexible probe | ✘ |
| Ball ended probe | ✘ |
| Measuring range [μm] | 0-1100 |
| Measurement resolution [μm] | 10µm or 1µm depending on the settings |
| Memory of measurements | No |
| Measurement rel. to a reference point | ✘ |
| HOLD function | Measurement is stopped on the display |
| MEASUREMENT ASSISTANT® function | Yes, LED |
| Measurement statistics | ✘ |
| UV tester | ✘ |
| Sound indication | ✘ |
| Power supply | 1 x 9V Alkaline battery |
| Calibration, zeroing | ✔ |
| Battery discharge indicator | ✔ |
| Illumination of the display | ✔ |
| Automatically turn off | ✔ |
| Languages | PL |
| Case | ✘ |
| Calibration kit | ✔ |
Related products
Lacquer meter GL-1s +
162,99 złGL-MAG varnish meter
33,99 złLacquer meter GL-8
161,99 zł
