GL-3s-UV varnish meter
179,99 zł
Car meter, GL-3sUV varnish tester:
✔ type of measuring probe: probe on the cable;
✔ measurement on steel, galvanized and aluminum sheets;
✔ measurement resolution: 10µm or 1µm – selection in MENU;
✔ measurement range (varnish thickness): 0µm to 2000µm;
✔ measurement memory: 200 items;
✔ UV tester;
✔ HOLD function – freezing the measurement;
✔ maximum / minimum measurement;
✔ sound signaling;
✔ meter calibration – zeroing (calibration) plate is included;
✔ LCD backlight;
✔ automatically turn off the meter after prolonged inactivity;
✔ power supply: two R3 (AAA) alkaline batteries;
✔ polycarbonate keyboard;
✔ 3 languages: Polish, English, German.
✔ 24 months warranty.
EAN-13 code: 5904730635271
Simple and functional with a wire probe and UV tester
GL-3s-UV meters are a modernization of previous GL-3s meters. In these models, an additional UV diode was used, which allows e.g. checking the originality of car documents. The small size of the meter means that we can easily fit it into an average pocket. In addition, a new, better quality housing made of high quality plastic was used.
MIN / MAX function
The MIN / MAX function allows you to read the minimum and maximum measurements that have been made in the whole series of measurements.
UV tester
The UV tester allows verification of car documents and means of payment.
HOLD function
The HOLD function allows you to make a measurement and stop it, so you can move the meter away from the tested surface and read the measurement.
Sound signaling
Sound signaling is especially useful when making measurements with the HOLD function activated. After the measurement, the meter informs us of this fact with a short beep.
Calibration function
- simple calibration,
- circuit board included.
The calibration – zeroing function means that the meter will measure correctly in all conditions, even after several years of use.
Before measurements, you can calibrate the meter and be sure that the measurements will be correct.
The meter has compensation thanks to which it automatically calibrates, but accurate calibration is always possible using a calibration plate.
Note the meters without calibration plates – in such meters the measurement error will soon increase, because the probe wears (rubs off) and will additionally affect the aging of electronic components. That is why even meters worth several thousand zlotys have calibration plates and a calibration function in the set.
The set consists of:
- thickness meter GL-3s-UV
- zeroing plate – calibration
- 2 x AAA alkaline batteries
- company case made of eco-leather
- instruction
| Seria | standard |
|---|---|
| GL-SMART application | ✘ |
| Sheet type | Steel, galvanized steel, aluminum |
| Type of measuring probe | na przewodzie |
| Flexible probe | ✘ |
| Ball ended probe | ✘ |
| Measuring range [μm] | 0-2000 |
| Measurement resolution [μm] | 10µm or 1µm depending on the settings |
| Memory of measurements | Yes, 200 |
| Measurement rel. to a reference point | ✘ |
| HOLD function | ✔ |
| MEASUREMENT ASSISTANT® function | ✘ |
| Measurement statistics | Yes (min/max) |
| UV tester | ✔ |
| Sound indication | ✔ |
| Power supply | 2 x AAA alkaline battery |
| Calibration, zeroing | ✔ |
| Battery discharge indicator | ✔ |
| Illumination of the display | ✔ |
| Automatically turn off | ✔ |
| Languages | PL, EN, DE |
| Case | ✔ |
| Calibration kit | ✔ |
Related products
Lacquer meter GL-1s +
162,99 złLacquer meter GL-3UV
132,49 złLacquer meter GL-8s
219,99 zł
